Vibrating dewatering screen

Summary

Vibration dewatering screen,of which the main role is dewatering, desliming, demedia, can be used for sand and gravel plant water washing, coal slime recovery, concentrator tailings dry discharge, etc. , is therefore also called sand dehydration sieve, mine dehydration sieve, coal slime dehydration sieve, iron ore dehydration sieve, high frequency dehydration sieve and so on.Although they belong to the same dewatering equipment, the structure of the dewatering screen is different when it acts on different materials, such as the sand dewatering screen on the water washing sand production line and the tailings dewatering screen commonly used in the concentrator.

The dewatering screen recommended here is mainly used in the wet sand production line, matched with the sand washing machine, or used alone.

Performance advantages

1. Ultra high molecular polyurethane (UHMW_PE) is used as the screen material of vibration dehydration screen,which is impact resistant, low temperature resistant, wear-resistant, chemical corrosion resistant, self-lubricating , absorbing impact energy. The impact resistance is the highest among all plastics, and the wear resistance is superior to PTFE, nylon, carbon steel and other materials.

2. The vibration motor of the vibration dewatering screen is convenient to replace, and the rubber spring of the base is used for damping, so that the vibration with small amplitude and slow speed can be removed cleanly.

3. The vibrating dewatering screen can be customized according to the output and water content.The side plate of the machine body has a reinforcing plate, the bottom is equipped with a support, the bottom is equipped with a horizontal bar, and the outlet is supported by a triangular steel plate, which is thick.

4. The vibration motor is fixed with high-strength bolts and the bottom spring is rubber spring. The quality of the spring will affect the life of the vibration motor. The fixed density of the sieve plate is high, and the sieve plate is provided with reinforcing ribs.

5. After welding, the welder will strictly avoid welding holes, and the bottom will be supported by channel steel.

6. In addition, the mesh can be adjusted according to the needs, the equipment noise is small, and the dehydration effect is good.

7. Before delivery, the staff will debug it, check whether the vibration motor is normal and whether the exciter is in good operation, so as to ensure the quality of products for customers.

Technical parameters