Product Introduction
Summary
The SA series ceramic filter developed by our company is a new type, high efficiency and energy saving solid-iquid separation equipment, which integrates high and new technologies such as Mecharonics, electromotion conirol, ultrasonic cleaning, microporous materials, etc. . The outstanding characteristics of ceramic filter are: high eficiency, energy saving, good filtering effect, high degree of automation, low operating cost, clear filtrate which can be used comprehensively, dry filter cake and adjustable moisture, strong adaptability to the filter medium, Can Be widely used in non-ferrous,metallurgical, quartz, chemical, pharmaceutical, food, environmental protection, fossil-fuel power station, coal treatment sewage treatment and other industries.
Working principle
1. At the beginning of the work, the filter plate immersed in the slurry trough forms a thick layer of particles on the surface of the filter plate under the action of vacuum. The filtrate is filtered through the filter plate until the distribution head reaches the vacuum bucket.
2. In the dry zone, the filter cake will continue to be dehydrated under vacuum until it meets the production requirements.
3. After the cake is dried, it is scraped off by scraper in the discharge area and fransported directly from the clay to the sand pit or by belt to the place where it is needed.
4. After discharge, the filter plate finally enters the backwashing zone, the filtered water enters the filter plate through the distributor, backwashing the filter plate, and the particles on the micro-pores are backwashed, thus completing the filtering
operation cycle of one revolution.
5, ultrasonic cleaning, filter media after a certain time of circulation work, generally 8 to 12 hours, at this time to ensure that the filter plate micro-hole unobstructed, with ultrasonic cleaning and chemical cleaning, generally 45 minutes to 60 minutes, so that some can not be backwashed off attached to the solid material on the filer plate completely removed from the filter media to ensure a higher efficiency of starting again.
Technical parameters
| Name | Filter parameters | ||||||||||
| 3㎡ | 8㎡ | 12㎡ | 16㎡ | 20㎡ | 24㎡ | 30㎡ | 36㎡ | 45㎡ | 60m㎡ | 80㎡ | |
| Filter plate quantity(block) | 36 | 48 | 72 | 96 | 120 | 96 | 120 | 144 | 180 | 180 | 240 |
| Number of discs (turns) | 3 | 4 | 6 | 8 | 10 | 8 | 10 | 12 | 15 | 15 | 20 |
| Filter area per circle (㎡) | 1 | 2 | 2 | 2 | 2 | 3 | 3 | 3 | 3 | 4 | 4 |
| Filtering area (㎡) | 3 | 8 | 12 | 16 | 20 | 24 | 30 | 36 | 45 | 60 | 80 |
| Disc speed (r/min) | 0.5-1.5 | ||||||||||
| Main motor power (kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 2.2 | 2.2 | 3 | 3 | 5.5 | 5.5 |