SCT series wet permanent magnet concentration magnetic separator-Magnetic Separator Series -临朐三星电磁设备有限公司

Product Introduction

Scope of application

This product is specially designed for the concentration of low concentration slury in magnetic separation process, toimprove concentration and increase the efficiency of second stage grinding.

Technical characteristics

1. The magnetic system is designed with large wrap angle, and the recovery rate of ore powder can reach 99.5%.
2. Simple structure, high dewatering efficiency, concentrate concentration over 45-75%.
3. Using scraper instead of water to wash and unload ore in the side of unloading ore, the pulp concentration is high.

技术参数

Model	Cylinder size (DxL)	Surface magnetic induction		Processing capacity		Driving Power (KW)	Type of reducer (GZQ)	Cylinder speed (r/min)	Total weight of equipment (kg)
		Center value of pole geometry (GS)	Maximum magnetic (GS)	t/h	m³/h
		Center value of pole geometry (GS)	Maximum magnetic (GS)	t/h	m³/h
CTB-924	900X2400	1600	1800-7500	25-55	90	4	350	28	2600
CTN-924
CTS-924
CTB-1024 CTN-1024 CTS-1024	1050X2400	1600	1800-7500	50-100	160	5.5	350	22	3500
CTB-1030 CTN-1030 CTS-1030	1050X3000	1800	1800-7500	60-110	200	7.5	350	20	4500
CTB-1230 CTN-1230 CTS-1230	1200X3000	1800	1800-7500	70-120	200	11	400	20	5000
CTB-1240 CTN-1240 CTS-1240	1200X4000	1800	1800-7500	100-150	250	15	400	20	6000
CTB-1530 CTN-1530 CTS-1530	1500X3000	1800	1800-7500	120-150	220	15	500	16	6500
CTB-1540 CTN-1540 CTS-1540	1500X4000	1800	1800-7500	150-180	300	18.5	500	16	8000
CTB-1550 CTN-1550 CTS-1550	1500X5000	1800	1800-7500	170-200	350	22	500	16	10000

Note: s in the model is current Trough (CTS),n iscounter current trough (CTN), B is half counter current trough (CTB).