Permanent magnetic drum magnetic separator-Magnetic Separator Series -临朐三星电磁设备有限公司

Product Introduction

Scope of application

Permanent magnet drum magnetic separator are used for wet separation of fine magnetic minerals in iron mines or removal of magnetic impurities in non-magnetic minerals.

Technical characteristics

1.Adopt advanced magnetic field design, the magnetic penetration depth is big, the processing capacity is high.

2.Simple structure and seal, no failure rate.

3.Easy to install and maintain, reliable performance.

4.The transmission is stable, long time without fault operation.

5.The equipment cylinder can be equipped with three kinds of trough, namely, along current Trough (CTS) , counter current trough (CTN) and half counter current trough (CTB) ,in order to adapt to different selection requirements.

Technical parameters

Model	Cylinder size	Surface magnetic induction		Processing capacity		Driving Power (KW)	Type of reducer (GZQ)	Cylinder speed (r/min)	Total weight of equipment (kg)
Model	Cylinder size	Center value of pole geometry	Maximum m(gce)tic	t/h	m³/h	Driving Power (KW)	Type of reducer (GZQ)	Cylinder speed (r/min)	Total weight of equipment (kg)
CTB(N.S)-618	600x1800	1400	1800-7500	8-15	40	2.2	200	35	1300
CTB(N.S)-712	750X1200	1400	1800-7500	10-17	50	3	250	30	1500
CTB (N.S)-718	750X1800	1600	1800-7500	12-20	72	3	250	28	2100
CTB(N.S)-918	900X1800	1600	1800-7500	25-55	90	4	350	28	2600
CTB(N.S)-924	900X2400	1600	1800-7500	35-70	110	4	350	28	3000
CTB(N.S)-1021	1050X2100	1600	1800-7500	40-90	160	5.5	350	22	3400
CTB(N.S)-1024	1050X2400	1600	1800-7500	50-100	160	5.5	350	22	3500
CTB(N.S)-1030	1050X3000	1800	1800-7500	60-110	200	7.5	350	20	4500
CTB(N.S)-1230	1200X3000	1800	1800-7500	70-120	200	11	400	20	5000
CTB(N.S)-1240	1200X4000	1800	1800-7500	100-150	250	15	400	20	6000
CTB(N.S)-1530	1500X3000	1800	1800-7500	120-150	220	15	500	16	6500
CTB(N.S)-1540	1500X4000	1800	1800-7500	150-180	300	18.5	500	16	8000
CTB(N.S)-1550	1500X5000	1800	1800-7500	170-200	350	22	500	16	10000