Scrubber

This equipment is mainly used for the dispersion of ore slurry, removal of impurities on the mineral surface, and scrubbing. It is suitable for the dispersion of ore slurry and removal of impurities on the mineral surface, such as silicon carbide, mullite, limestone, barite, potassium-sodium feldspar, wollastonite, dolomite, calcite, and limestone. 

Introduction of the working principle

Ore pulp enters the scrubber chamber through the feed pipe. Under the powerful stirring action of the impeller, the pulp generates intense turbulence. Mineral particles have great momentum within the pulp and undergo intense friction and collision with each other. The thin film of impurities wrapped around the mineral particles is easily stripped off the mineral surface due to its low strength after friction and impact. The cementing material on the mineral surface also becomes loose and disintegrates after being soaked in water and undergoing intense friction and collision between mineral particles, achieving separation of clayey matter and mineral particles. These film impurities and disintegrated clayey matter are stripped off into the ore pulp and can be separated from the pulp through subsequent desliming. In actual production processes, different reagents are added according to the actual situation of the minerals. 

Technical parameters